8 Ways To Improve Indoor Air

Air pollution isn’t limited to the outdoors. Moisture, odors, gases, dust and a host of other irritants can affect air quality indoors, too. Try these tactics to help freshen your home’s air so you and your family can breathe easy.

  1. Open windows.  Most heating and cooling systems recirculate inside air. When weather permits, give your system a break and let fresh air in. Open windows and place fans strategically to help direct fresh air through.
  2. Use exhaust fans.  Turn on the kitchen fan to vent cooking pollutants, and the bathroom fan to curb mold-promoting wetness and cleaning-product fumes. Leave it running for about 45 minutes.
  3. Do doormats.  They help prevent dirt and other outdoor pollutants from making it inside. Get two natural-fiber mats, one for inside and the other for outside your main entrance. Keep a shoe-free home, too.
  4. Test for mold & radon.  The naturally occurring gas is colorless and odorless. It’s also the second-leading cause of lung cancer, after smoking. DIY test kits, available online and at your local home improvement store, are inexpensive and easy to use. Mold can linger in a home without you even knowing it.  Having your home professionally tested could indicate whether or not you may have a mold problem.
  5. Don’t mask odors.  Scented candles and sprays can irritate lungs, too. Find the source of the smell, get rid of it, then ventilate well until it’s gone.
  6. Use a dehumidifier.  Stay under 50 percent humidity to keep mold growth at bay. Clean your dehumidifier regularly, too, so it doesn’t switch from humidity-reducing friend to mold-harboring foe.
  7. Vacuum regularly.  You’ll reduce the amount dust and other pollutants released when you walk around. Invest in a quality vacuum with a HEPA (high-efficiency particulate air) filter, especially good at trapping even tiny bits of dust and dirt.
  8. Take it outside.  Painting, sanding, gluing — anything that generates particles, gases or other pollutants. If outside isn’t an option, open a nearby window and add a fan blowing air out. Clean up after your project quickly and well.

MoldSolutions24-7.com

The Backup Differences

Storm Water Backing Up

In many older houses with basements (mostly pre-1980), there is a perimeter foundation drain outside the exterior wall, at the level of the basement floor, next to the footings at the time the house was built. A pipe was usually installed from the perimeter foundation drain to the street where it was connected to the city storm sewer system.

This can become a problem as the city storm sewer system becomes too small when more development causes more rain runoff. When this happens, the rainwater in the sewer system can get so high that water flows backwards toward the house.

Usually, the installation of an interior perimeter basement drain system connected to a sump pump will take care of the problem. If it doesn’t, the (more expensive) alternative is to dig up and cap the pipe that is running from the house to the street from the perimeter foundation drain. However, this is not always possible; many times, this pipe is also draining sanitary waste from toilets and sinks in the house.

Sewer Water Back Up

If the water is coming up through floor drains or sink drains in the basement, then the problem is often water backing up from the municipal sanitary sewer system. During heavy rains, combined sewer systems can become overwhelmed with water. This can cause sewer water to back up in the system and sometimes into homes.

There are other possible explanations, too. Sewer backups can be caused by individual service lines being plugged by grease, waste, tree roots, breaks in pipes or saturated ground. Sewer mains can also be plugged by vandalism or large items dropped down manholes. This kind of flooding is an enormous problem for homeowners, as it’s largely out of your control and probably means fecal waste backing up into basements. Not only is it disgusting, but it can also be a serious health hazard.

In order to keep your individual lines clear, you can install backflow preventers that help stop sewer water from flowing backward into the house. Proper maintenance of your individual lines – for example, pouring tree root killer down your toilets once a year – can also go a long way in preventing sewage backups. Still, the problem is often out of your control. Sewage in your basement means a major cleanup and a lot of uncertainty about future problems. If it’s something you’ve seen in your home, you’ll have to get your city government involved. At the very least, be aware of the problem and don’t leave anything valuable near your downstairs drains.

MoldSolutions24-7.com

Checking For Water Damage

Your home protects you from the elements, but heavy rains can weaken that protection. With a little maintenance and a lot of vigilance, it’s not hard to stay safe and dry.

Spring rainstorms are a fact of life in many areas of the country, and they help keep things green, even if they keep you inside. But when they get heavy, it’s time to start thinking about the potential impact all that water has on your home. The first step is finding and fixing any immediate problems as soon as it’s safe to do so. Then, you’ll want to take measures to prevent those problems from happening during the next downpour!

Where is all that rain going?
Your roof and gutters form a key line of defense for your home – and in a storm, they’re vulnerable, because so many things can damage them. Trees, hail, and other objects can create weaknesses that might lead to leaks in your roof, so check for missing shingles and other issues. And keep your gutters clear so all that water drains properly.

Are you checking everywhere?
Water dripping from the ceiling is hard to miss. Water in your crawl space, however, can easily go undetected because hardly anyone ever checks there. Don’t forget to look down there after a storm (or have a professional do it) to make sure everything is nice and dry. If you do see moisture, you’ll want to get it out with a sump pump as soon as possible.

And don’t just look up – another place to check is your home’s exterior, whether it’s siding, brick, or another material. Weak spots can be hard to see, so look at various times of the day in different lighting conditions.

Of course, you’ll want to make sure your doors and windows are properly sealed to keep the elements out, too.

What about around your property?
Storm water has to go somewhere, and if your property doesn’t drain well, or if runoff goes toward your foundation, you could have problems. So watch for patterns, and grade property so it drains away from your home if possible. Always be wary of hillsides and tilting trees after heavy storms, because the land might not be stable.

And don’t forget to keep storm drains clear of leaves and other debris. This can prevent flooding both on the streets and your own property.

What should you do during the storm?
During powerful storms, stay inside. This is not the time to check your roof, your exterior, or your property unless there’s an emergency and you know it’s safe to go out. Monitor your interior, making sure no water is getting in. If it is, do what you can to alleviate the situation in the moment, even if it means just placing something under a leak to collect the water. For more serious problems, though, remember that safety is the most important thing. If your basement is flooding, for example, don’t go down there – you could be trapped and even drown.

Biowashing.com